
INVERTO M0.8-F
MIG WELDING MACHINE
Earlier name: M270F
Separate feeder. Works on 1, 2 or 3-Phase power. Heavy duty.
- For 0.8 mm MIG wire
- 1/2/3-Phase220 V on 1-Phase, 380 V on 2 or 3-Phase
- 11 kgMachine weight
- 420 × 220 × 380 mmDimensions
Specifications
| Input voltage | 220 V on 1-Phase, 380 V on 2 or 3-Phase |
|---|---|
| Supply | 1-Phase, 2-Phase or 3-Phase |
| For 0.8 mm MIG wire | |
| Weight | 11 kg |
| Dimensions | 420 × 220 × 380 mm |
Special features
- Works with 1-Phase, 2-Phase or 3-Phase power
- With separate wire feeder
- Heavy duty
- With MIG and MMA (arc welding) functions
- With 2T, 4T and spot modes
- With digital current and voltage display
- With inductance control
Includes power source, wire feeder, MIG torch and Earth Cable. Wire feeder cable is not included. It is made to the length you need.
Applications
- Trolleys
- Farm parts and equipment
- Water tanks and drums
- Industrial sheds
- General repair
Welding jobs up to 6 mm thick when full strength is needed. Jobs up to 8 mm thick when only the shape is to be made without much strength.
About this machine
The INVERTO M0.8-F is a heavy duty inverter MIG welding machine with a separate wire feeder. It works on single phase, two phase or three phase power, so it fits more kinds of supply.
2T and 4T modes let you either hold the trigger or latch it, which is easier on long welds. Inductance control lets you make the weld softer or sharper to suit the job. At 11 kg, it is a compact machine that one person can move between jobs.
It is a good fit for trolleys; farm parts and equipment; and water tanks and drums. It is a heavy duty model. For light, regular jobs, a small, light weight and portable welder is easier to carry.
The wire feeder is separate from the power source, not inbuilt, so it can sit close to the job. Its cable is not included; it is made to the length you need. Before you buy, look at the MIG torch too. The tip and the nozzle wear first, then the tip holder and the swan neck, and the liner can clog and slow the wire. For shielding gas, ask whether CO2 or a mixed gas of argon and CO2 is right for your work, and whether the torch is gas cooled or water cooled. We, Mastech Industrial Control, import and supply this machine under our brand WELDROX. Write to us on WhatsApp with your work, and we will tell you if it is the right machine.
This machine and other MIG machines that work on the same supply. Tick up to 3 and press Compare, or press Compare all.
This machineM0.8-FMIG Welding MachineFor 0.8 mm MIG wire1/2/3-PhaseInput voltage 220 V on 1-Phase, 380 V on 2 or 3-Phase- With separate wire feeder
- Heavy duty
- With MIG and MMA (arc welding) functions
- +3 more
Wire feeder cable is not included. It is made to the length you need.
M0.8-SMMIG Welding MachineFor 0.8 mm MIG wire1-PhaseInput voltage 220 V- With inbuilt wire feeder
- With synergic controls
- With multiple-board design
- +3 more
M0.8MIG Welding MachineFor 0.8 mm MIG wire1-PhaseInput voltage 220 V- With inbuilt wire feeder
- Heavy duty
- With MIG and MMA (arc welding) functions
- +3 more
M1.0MIG Welding MachineFor 1.0 mm MIG wire3-PhaseInput voltage 415 V- With inbuilt wire feeder
- Heavy duty
- With MIG and MMA (arc welding) functions
- +4 more
Partner for Life
Tell us your work and we will suggest the right machine. Write to us on WhatsApp at +91 82848 29999.